Russ is a Certified Fire and Explosion Investigator, as well as a former Fire Captain, Fire Prevention officer, and member of the Arson Strike Force. He has over 20 years of experience and has performed over 1,000 fire and explosion investigations, including large structural losses, vehicle fires, and wildland fires. Russ also investigates and reports on technical failures, specializing in fire sprinkler systems.
Tyler is an architectural technologist and BCIN qualified designer with experience preparing formal engineering plans and permit drawings, as well as conceptual drawings and high-quality renderings. Tyler has a proven track record of managing a wide array of projects, ranging from residential renovations to new commercial constructions. He has extensive knowledge of applicable building codes and zoning laws.
Mesbah is a Civil Engineering Professional with nearly 10 years of demonstrated proficiency in the field of Structural Engineering. He specializes in structural analysis and design. His experience includes the design of low- and mid-rise steel and concrete residential buildings, as well as providing as-built plans for bridges and other infrastructure. He has analyzed and designed concrete and steel structural elements, examined bridges for structural deficiencies, and inspected steel framework, reinforcing steel mesh and rods, and concrete forms to ensure quality standards and to verify conformance to specifications and building codes. Mesbah has further experience developing concrete mix designs and is proficient in concrete technology. In addition, he has sound knowledge of safety standards which he is able translate onto construction sites. Mesbah is in expert in AutoCAD and structural design software such as ETABS and SAP.
Jimmy is a certified Fire and Explosion Investigator. His professional experience includes 22 years as a Fire Fighter with the Ottawa Fire Service and 10 years as a Fire Investigator with the Ottawa Fire Department, Fire Investigations Unit. He has performed over 200 investigations and assisted in a further 12 investigations with The Ontario Fire Marshal’s Office, three of which were fatal fires and one a large explosion. Jimmy has been accepted as an expert witness in Ontario Provincial and Civic court.
Kelly is a Certified Fire and Explosion Investigator and Certified Vehicle Fire Investigator. He has over 15 years of experience with the Calgary Police Department, including as a Detective on the Arson Team where he investigated fires deemed suspicions. Prior to the Calgary Police Service, Kelly spent 13 years as an Advanced Care Paramedic for the City of Calgary and served as a Firefighter for the Cochrane Fire Department. He is a member of the National Association of Fire Investigators (NAFI) and was awarded the Alberta Emergency Service Medal for 32 Years of Service.
Guy is a Certified Fire & Explosion Investigator and Fuels Specialist with extensive experience conducting forensic investigations into fires and explosions as well as mechanical systems and equipment. Guy worked within the Fuels Safety program at Ontario’s Technical Standards & Safety Authority for 17 years, prior to which he was employed in the HVAC industry for a further 15 years, both as a technician and a commercial/industrial gas instructor. Guy has served in leadership roles, including vice-chair at the Regional Common Ground Alliance, statutory director under the Technical Standards & Safety Act, and as a member of the B149.1 code committee.
Amanda is a Fire Investigator specializing in mechanical engineering, failure analysis and origin and cause investigation of fires. She holds a bachelor’s degree in Mechanical Engineering from McMaster University, along with a Co-Op designation. Amanda has attended and participated in over 100 fire scene investigations and mechanical failure examinations.
Hussein is a structural designer and forensic investigator. He is a registered building code designer in Building Structural, Large and Small Buildings with the MMAH and a certified engineering technician with the OACETT. Hussein holds a bachelor’s degree from McMaster University, and he is currently a Master of Engineering candidate at the University of Toronto in Structural & Forensic Engineering. Hussein currently specializes in structural and building envelope investigations, and the design of structural repairs.
He is also experienced in structural and architectural design and building information modelling. He specializes in creating structural and architectural drawings using Autodesk REVIT, as well as preparing structural plans and performing calculations for wood, steel, and concrete structures. Hussein has comprehensive knowledge of the Canadian Building Codes and Standards.
Hasan specializes in preparing Structural Drawings, Architectural Drawings, Site Plans, Structural Calculations for Part 9 Buildings and Commercial Units. Hasan also has comprehensive knowledge in applying the Ontario Building Code, whether Part 3, Part 4 or Part 9, to Residential and Commercial Buildings. Hasan is well versed in the Zoning Bylaws and the Building Permit Processes in most of the municipalities in Ontario. Utilizing this knowledge, Hasan is an expert at securing Building Permits under his seal as Registered Building Code (BCIN) Designer. Throughout this process, Hasan has conducted numerous Building Inspections and managed numerous projects from start to end. Hasan is also an associate member of the Ontario Association of Civil Engineering Technicians and Technologists.
John is a Certified Fire and Explosion Investigator and Fuels Specialist. He has over 17 years of experience, including 3 years with the Technical Standards and Safety Authority where he was Fuels Safety Inspector and Fuels Technical Trainer. Prior to that, he spent 10 years as a Refrigeration and Air Conditioning Systems Mechanic (313A Journeyperson) and Construction and Maintenance Electrician (309A Journeyperson). John has also taught refrigeration and gas fitting at Fanshawe and Conestoga Colleges.